121
edits
Changes
From Amahi Wiki
Marvell Plug Computer Booting (view source)
Revision as of 18:04, 12 February 2011
, 18:04, 12 February 2011added openrd section
See the instructions here on how to allow the PogoPlug & DockStar to boot from USB: http://plugapps.com/index.php5?title=PlugApps:Pogoplug_Setboot<br/>
Stop after executing the ''pogo_u-boot_install.sh'' script in step 1.
= OpenRD Client =
The instructions for the OpenRD client are roughly similar to the ones for Sheevaplug. There are a few notable differences though.
* If your serial port does not work you need to use VID 0403 and PID 9e90
* the arcNumber for OpenRD Client is 2361
* when booting from an usb device the device will be /dev/sdb if you also have an internal disk mounted. You need to change bootargs accordingly (e.g. root=/dev/sdb1)
* apparently doing 'usb start' twice from u-boot makes that the usb device is not re-detected. In that case it is needed to powercycle the device.
= OpenRD Base =
I have no OpenRD Base but the key difference between Base and Client as far as booting concerns is the arcNumber. OpenRD Base has arcNumber 2325<br>
If you manage to get things working with OpenRD Base please update this section.
