Following this procedure will also change the DHCP server's address/range and the gateway address to your network. As with all changes to networking configuration, have a good knowledge of what you are doing and plan your changes carefully. '''NOTE:''' This procedire will not allow you to change the HDA IP address, only make them match the change to the network gateway ([http://en.wikipedia.org/wiki/IP_address 1st, 2nd, or 3rd octet]). Amahi server assigns IP addresses < 100 for Static IP Reservations and > 100 are for DHCP leases. This cannot be changed at the current time.
*[http://wiki.amahi.org/index.php/Open_Terminal_as_root Open terminal as root].
***HDA IP is 192.168.0.10 but would be changed to 192.168.2.10 automtically.
***DHCP Server Range is 192.168.0.100-255 but would automatically change to 192.168.2.100-255.
'''NOTE:''' Amahi server assigns IP addresses < 100 for Static IP Reservations and > 100 are for DHCP leases. This cannot be changed.
*You will get "Network settings were successfully applied. Your HDA services have been restarted....It is strongly recommended that you reboot all systems on your network at this point."