4,146
edits
Changes
From Amahi Wiki
Network troubleshooting (view source)
Revision as of 08:07, 27 December 2009
, 08:07, 27 December 2009no edit summary
If you do not have connectivity, you may want to check that the settings that you programmed in amahi.org for your network and router match that of your actual network and the router in it. Amahi assumes a regular, typical home network and the settings there should be done to match what you have. The most common error is that the gateway is not set up properly. We have a page on how to [[Find Your Gateway IP]].
Please note that '''only the first NIC/ethernet card (eth0)''' is supported out of the box. If you have two, please make sure you use eth0 for the LAN where your Amahi HDA resides. There is an unsupported way to support amahi on the [[ETH1|eth1]] device.
Tell us what step you get stuck at:
