Difference between revisions of "Amahi 11 Install"

From Amahi Wiki
Jump to: navigation, search
Line 1: Line 1:
 
__TOC__
 
__TOC__
 +
<br>
 +
<big>Welcome to Amahi 11!</big>
  
 +
These instructions below will guide you through the Amahi 11 Express CD installation, step by step, with screenshots.  This is the recommended method for quick download and fast setup.
 +
 +
Should the Amahi 11 Express CD not work for you, there are two alternate install methods for Fedora and Amahi 11:  [[Fedora_27_Server_CD_Install|Minimal CD]], so-called Netinstall or [[Fedora_27_Server_DVD_Install|Full (DVD) install]] (provides additional hardware support).
 +
<br>
  
 
'''NOTES:'''
 
'''NOTES:'''
Line 7: Line 13:
 
* 32-bit installs '''are not''' available nor supported in Amahi 11.
 
* 32-bit installs '''are not''' available nor supported in Amahi 11.
 
* '''NOT ALL''' apps in previous Amahi versions are available for Amahi 11.  Check the [https://www.amahi.org/apps App Store] before proceeding.
 
* '''NOT ALL''' apps in previous Amahi versions are available for Amahi 11.  Check the [https://www.amahi.org/apps App Store] before proceeding.
−
* You must install Fedora 27 Server prior to installing Amahi 11.
+
<br>
−
 
 
−
 
 
 
For assistance, visit the [https://forums.amahi.org Amahi Forums] or live support on the [http://talk.amahi.org Amahi IRC channel].
 
For assistance, visit the [https://forums.amahi.org Amahi Forums] or live support on the [http://talk.amahi.org Amahi IRC channel].
  
−
= Install Fedora 27=
+
= Prerequisites =
−
There are two ways to install Fedora: Minimal (CD), so-called Netinstall, which is recommended, and the [[Fedora_27_Server_DVD_Install|Full (DVD) install]] for cases that need additional hardware support.
+
You need to obtain an install code (denoted YOUR-INSTALL-CODE below) from the [https://www.amahi.org/users Amahi control panel] after configuring a profile for the system you are installing, with '''proper network configuration''' for your network.
  
−
We recommend this method for a quick download and fast installation.
+
Express CD is preconfigured as follows:
 +
* '''LOCALIZATION:'''
 +
** '''KEYBOARD:'''  defaults to ''English (US)''.
 +
** '''LANGUAGE:'''  defaults to ''English''.
 +
** '''TIME AND DATE:'''  defaults to server time zone.
 +
* '''SOFTWARE:'''  ''Minimal Install'' and should not be changed.
 +
* '''INSTALLATION DESTINATION:'''  defaults to the first hard drive in a multi-drive system.
 +
* '''NETWORK & HOST NAME:''' detected automatically.
 +
* '''USER SETTINGS''': user ''admin'' is preconfigured with a password of ''administrator''.
  
−
* Fedora 27 Server Netinstall CD for 64 bit (484MB)
+
= Download =
−
** Primary:  [https://download.fedoraproject.org/pub/fedora/linux/releases/27/Server/x86_64/iso/Fedora-Server-netinst-x86_64-27-1.6.iso Fedora-Server-netinst-x86_64-27-1.6.iso]
+
* Amahi 11 Express CD (based on Fedora 27 Server) for 64 bit (577MB)
−
** Alternate:  [https://dl.fedoraproject.org/pub/fedora/linux/releases/27/Server/x86_64/iso/Fedora-Server-netinst-x86_64-27-1.6.iso Fedora-Server-netinst-x86_64-27-1.6.iso]
+
** Torrent - [http://dl.amahi.org/isos/Amahi-11-x86_64.torrent Amahi-11-x86_64.torrent] <code>(MD5 e32fb303d6488e98078042dc2d162d08)</code>
 +
** Direct Download - [http://dl.amahi.org/isos/Amahi-11-x86_64.iso Amahi-11-x86_64.iso] <code>(SHA1 cf972ec23f0c6b873884b80b4010b9b2b03be14a)</code>
  
−
* Burn the ISO to CD/DVD (or [[USB Install|USB]]), insert the media into your server, and reboot the system.
+
* Burn the ISO to CD/DVD (or [[USB Install|USB]]), insert the media into your server, and boot the system.
  
−
* These instructions below will guide you through the Fedora 27 Netinstall CD installation with screen shots and commentary. If you are not an advanced Linux user and know what you are doing, recommend you '''DO NOT''' deviate from the guidance.  Click '''[<Screenshot>]''' to show/hide the image.
+
* The instructions below have screen shots and commentary. If you are not an advanced Linux user and know what you are doing, recommend you '''DO NOT''' deviate from the guidance.  Click '''[<Screenshot>]''' to show/hide the image.
  
 
==Boot Screen==
 
==Boot Screen==
 
<ul>
 
<ul>
−
<li>Select ''Install Fedora 27''
+
<li>Select ''Install Amahi 11''
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
[[file:F27CD_SS0.PNG|600px]]   
+
[[file:A11E-SS0.PNG|600px]]   
 
</div><br></li>
 
</div><br></li>
 
</ul>
 
</ul>
Line 36: Line 49:
 
<ul>
 
<ul>
 
<li>Choose desired language and select ''Continue''
 
<li>Choose desired language and select ''Continue''
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
[[file:F27CD_SS1.PNG|600px]]   
+
[[file:A11E-SS1.PNG|600px]]   
 
</div><br></li>
 
</div><br></li>
 
</ul>
 
</ul>
Line 43: Line 56:
 
==Installation Summary==
 
==Installation Summary==
 
<ul>
 
<ul>
−
<li>The '''INSTALLATION SUMMARY''' screen will appear. It may take a few minutes to finish ''Checking software dependencies''
+
<li>The '''INSTALLATION SUMMARY''' screen will appear. It may take a few minutes to finish ''Downloading package metadata''
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
[[file:F27CD_SS2A.PNG|600px]]   
+
[[file:A11E-SS3.PNG|600px]]  
 +
</div><br>
 +
<li>Choose '''AMAHI SERVER SETUP''' and enter YOUR-INSTALL-CODE obtained earlier followed by '''Done'''.
 +
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
 +
[[file:A11E-SS6.PNG|600px]]   
 
</div><br></li>
 
</div><br></li>
−
 
+
<li>Select '''KEYBOARD''' and choose the default layout followed by '''Done'''.
−
<li>Change the '''KEYBOARD''' or '''TIME & DATE''' to match your locale if needed.</li>
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
<li> Verify '''NETWORK & HOST NAME''' indicates ''connected''.  Don't make any changes unless you are sure of what you are doing.</li> 
+
[[file:A11E-SS4.PNG|600px]]   
−
 
 
−
<li>Once complete, next choose ''INSTALLATION DESTINATION''. This is where you will select the disk drive to use.
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
 
−
[[file:F27CD_SS2B.PNG|600px]]   
 
 
</div><br></li>
 
</div><br></li>
−
</ul>
 
−
 
−
==Disk Drive Setup==
 
−
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #FFB6C1; margin: 3px 3px 1em 3px;">'''WARNING:'''  Amahi staff doesn't recommend using the default ''LVM'' partition scheme.  Doing so will dedicate most of the drive space in the system to the ''/home'' partition.  Amahi does not utilize this space, limiting storage for file shares and web applications.  For best results and maximum storage, use the ''Standard'' partition scheme.</div>
 
−
 
 
<ul>
 
<ul>
−
<li>Choose the disk drive you want to use for the Fedora installation. If you have more than one disk drive connected, '''DO NOT''' select them at this time. You will notice a ''check mark'' on the disk drive selected. Select ''I will configure partitioning'' and then choose ''Done''.
+
<li>If your keyboard layout is not listed, select the plus sign (+) and add the desired layout.
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
[[file:F27CD_SS3A.PNG|600px]]   
+
[[file:A11E-SS5.PNG|600px]]   
 
</div><br></li>
 
</div><br></li>
−
 
+
<li>Choose the desired layout followed by '''Done'''.</li>
−
<li>Should you have existing partitions on the disk drive you will be using for the Fedora 27 installation, they will have to be removed.</li>
+
</ul>
 +
<li>Verify:</li>
 
<ul>
 
<ul>
−
<li> You should see the existing partition about half way down the screen.
+
<li>'''TIME & DATE''' and change to match your locale if needed.</li>
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
+
<li>'''INSTALLATION DESTINATION''' indicates the correct hard drive if you have more than one connected.</li>
−
[[file:F27CD_SS3B.PNG|600px]] 
+
<li>'''NETWORK & HOST NAME''' indicates ''connected''. Don't make any changes unless you are sure of what you are doing.</li>
−
</div></li>
 
−
<li>Choose it to expand and display the existing partitions for deletion.  Select the first partition in the list followed by the minus (-) sign.
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD_SS3C.PNG|600px]] 
 
−
</div></li>
 
−
<li> When prompted Are you sure you want to delete all the data on ..., choose Delete It.
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD_SS3D.PNG|400px]] 
 
−
</div></li>
 
−
<li> Repeat the previous two steps until all the existing partitions on the disk drive are gone.</li>
 
−
</ul>
 
−
 
 
−
<li>Ensure the ''New mount points will use the following partitioning scheme:'' is changed to reflect '''Standard partition'''. Then select ''Click here to create them automatically''.
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD_SS3E.PNG|600px]] 
 
−
</div><br></li>
 
−
 
 
−
<li>The disk drive partition should look similar to this setup. For most users, then default partitioning scheme used will suffice. However, you can manually change it using the hard drive partition scheme documentation as a guide. Once complete, choose ''Done''
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD_SS3F.PNG|600px]] 
 
−
</div><br></li>
 
−
 
 
−
<li>You will now see '''SUMMARY OF CHANGES''' to the disk drive. Choose ''Accept Changes''
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
 
−
[[file:F27CD_SS3G.PNG|600px]] 
 
−
</div><br></li>
 
 
</ul>
 
</ul>
−
 
−
==Software Selection==
 
−
<ul>
 
−
<li>Next on the '''INSTALLATION SUMMARY''', select ''SOFTWARE SELECTION''
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD_SS4A.PNG|600px]] 
 
−
</div><br></li>
 
−
 
−
<li>Select ''Minimal Install'' and then choose ''Done''
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD_SS4B.PNG|600px]] 
 
−
</div><br></li>
 
 
</ul>
 
</ul>
  
Line 115: Line 86:
 
<ul>
 
<ul>
 
<li>Back to the '''INSTALLATION SUMMARY''' and ready to begin installation. Select ''Begin Installation''
 
<li>Back to the '''INSTALLATION SUMMARY''' and ready to begin installation. Select ''Begin Installation''
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
[[file:F27CD_SS5.PNG|600px]]   
+
[[file:A11E-SS7.PNG|600px]]   
 
</div><br></li>
 
</div><br></li>
 
</ul>
 
</ul>
  
−
==Initial User Creation==
+
==Installation Progress==
 
<ul>
 
<ul>
−
<li>Installation has begun and we need to create the initial user. '''DO NOT''' set the root password.
+
<li>Now all of the configuration steps are complete. Sit back and watch the progress.
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:600px">
−
[[file:F27CD_SS6A.PNG|600px]]   
+
[[file:A11E-SS8.PNG|600px]]   
 
</div><br></li>
 
</div><br></li>
−
 
+
<li>Once installation is complete, the machine will automatically reboot.  You will next see see a black screen with no graphics displaying the Amahi 11 installation progress. When it's finished, the machine will again reboot automatically.
−
<li>You '''MUST''' create the initial user and password (This will be your HDA Login, also called the First Admin User). Ensure you select ''Make this user administrator'' check box. Once complete, choose ''Done''. Note that a weak password may require you to select ''Done'' twice.
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
+
[[file:A11E-SS10.PNG|800px]]   
−
[[file:F27CD_SS6B.PNG|600px]]   
 
 
</div><br></li>
 
</div><br></li>
−
</ul>
+
<li>Once reboot is complete, you should have a fully functional home server using the IP address set up in your network!
−
 
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
==Installation Progress==
+
[[file:A11E-SS11.PNG|200px]]   
−
<ul>
 
−
<li>Now all of the configuration steps are complete. Sit back and watch the progress.
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
 
−
[[file:F27CD SS7.PNG|600px]]   
 
 
</div><br></li>
 
</div><br></li>
 
</ul>
 
</ul>
−
 
+
<br>
−
==Installation Complete==
 
−
<ul>
 
−
<li>Installation is complete. Choose ''Reboot'' and remove the installation media.
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:F27CD SS8.PNG|600px]] 
 
−
</div><br></li></ul>
 
−
 
 
−
= Install Amahi 11 =
 
−
 
 
−
Next, we will install Amahi 11 proper on top of Fedora 27.
 
−
<ul>
 
−
<li>When you reboot you will see a black screen with no graphics and a "localhost login" text prompt. Login into that that console directly with the user and password you created in the Fedora 27 installation. (You can also use SSH to login remotely from a client if you know how)
 
−
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}"  style="width:400px">
 
−
[[file:A11_SS1.PNG|450px]] 
 
−
</div><br><br>
 
−
 
 
−
:'''NOTE:'''  Passwords do not echo characters on the screen.
 
−
 
 
−
<li>You need to obtain an install code (denoted YOUR-INSTALL-CODE below) from the [https://www.amahi.org/users Amahi control panel] after configuring a profile for the system you are installing, with '''proper network configuration''' for your network.<br><br>
 
−
 
 
−
<li>From text console or using SSH (logged in with the user created in the Fedora 27 installation), become ''root'' for the Amahi installation.  When prompted for a password, it's your user password you set in the Fedora 27 install.<br />
 
−
 
 
−
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left">
 
−
  sudo su -
 
−
</div>
 
−
 
 
−
<li>After that, type these three separate commands (one per line) in the console:
 
−
 
 
−
<div style="border: 1px solid #A3B1BF; padding: .5em 1em; color: #000; background-color: #E6F2FF; margin: 3px 3px 1em 3px; text-align: left">
 
−
  <nowiki>rpm -Uvh http://f27.amahi.org/noarch/hda-release-10.5.0-1.noarch.rpm</nowiki>
 
−
  dnf -y install hda-ctl
 
−
  hda-install -i YOUR-INSTALL-CODE
 
−
</div>
 
−
</ul>
 
−
What this does is installs the Amahi F27 repo, gets the mariadb base packages to avoid dependency conflicts, and installs base Amahi packages (that part should install several packages).
 
−
 
 
−
If there are no errors, install Amahi (replace ''YOUR-INSTALL-CODE'' above with install code you got when creating a profile at [https://www.amahi.org/users your Amahi control panel]).
 
−
 
 
−
If all goes well, it should tell you to reboot. Go ahead and reboot!
 
−
 
 
−
Once it comes back from the reboot, you should have a fully functional home server using the IP address you set up in your network!
 
−
 
 
 
Next you need to transition your network to use it!
 
Next you need to transition your network to use it!
  
Line 188: Line 112:
  
 
Once installed, you will want to transition your network to using your Amahi server. Here are some of the things you should know:
 
Once installed, you will want to transition your network to using your Amahi server. Here are some of the things you should know:
−
 
+
<ul>
−
* Your server will boot with the static IP you pre-configured in the Amahi control panel
+
<li>Your server will boot with the static IP you pre-configured in the Amahi control panel</li>
−
* This is a headless server, therefore it will boot to a text console.  There is no desktop user interface. '''Installing the Desktop (e.g. GNOME) interface will break DNS/DHCP and make the HDA as an unsuitable network server''' [[Amahi_8_Troubleshooting#Virtualization_Stack_Breaks_DNS.2FDHCP_Server|(details)]]
+
<li>This is a headless server, therefore it will boot to a text console.  There is no desktop user interface. '''Installing the Desktop (e.g. GNOME) interface will break DNS/DHCP and make the HDA as an unsuitable network server''' [[Amahi_8_Troubleshooting#Virtualization_Stack_Breaks_DNS.2FDHCP_Server|(details)]]</li>
−
* It's strongly recommended you follow the [[transition to Amahi]] HDA guide to get your network fully working properly
+
<li>It's strongly recommended you follow the [[transition to Amahi]] HDA guide to get your network fully working properly</li>
−
* You can verify if the dashboard is available by accessing it from any client using the IP address of your server '''<nowiki>http://IPADDRESS/</nowiki>''' or '''<nowiki>http://hda/</nowiki>''' (in most Windows clients this works even without DNS from your HDA)
+
<li>You can verify if the dashboard is available by accessing it from any client using the IP address of your server '''<nowiki>http://IPADDRESS/</nowiki>''' or '''<nowiki>http://hda/</nowiki>''' (in most Windows clients this works even without DNS from your HDA)</li>
−
* The first time it will initialize, ask you to login, and enter a dashboard password.
+
<li>The first time you access the dashboard, you will need to login with user name and password as noted above  in [[Amahi_11_Install#Prerequisites|Prerequisites]].
−
* Once you reach your [[Setup|dashboard]], you should [[Storage_and_file_sharing|create shares]] as needed, [[Adding_a_second_hard_drive_to_your_HDA|add more drives]], install apps, etc.
+
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
−
* Optionally refer to [[Greyhole#Amahi_7.2F8|Greyhole]] to install/configure storage pooling.
+
[[file:A11-SS1.PNG|250px]] 
 +
</div><br></li>
 +
<li>Once you reach your dashboard, recommend you configure your HDA [[Setup|settings]], [[Storage_and_file_sharing|create/manage shares]], [[Adding_a_second_hard_drive_to_your_HDA|add more storage space]], install apps, etc.
 +
<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">
 +
[[file:A11-SS2.PNG|400px]] 
 +
</div><br></li>
 +
<li>Optionally refer to [[Greyhole#Amahi_7.2F8|Greyhole]] to install/configure storage pooling.</li>
 +
</ul>
  
 
= Troubleshooting =
 
= Troubleshooting =

Revision as of 01:07, 25 October 2018


Welcome to Amahi 11!

These instructions below will guide you through the Amahi 11 Express CD installation, step by step, with screenshots. This is the recommended method for quick download and fast setup.

Should the Amahi 11 Express CD not work for you, there are two alternate install methods for Fedora and Amahi 11: Minimal CD, so-called Netinstall or Full (DVD) install (provides additional hardware support).

NOTES:

  • The only officially supported install media is Fedora 27 Server.
  • Ensure your system meets the minimum hardware requirements for Amahi before proceeding.
  • 32-bit installs are not available nor supported in Amahi 11.
  • NOT ALL apps in previous Amahi versions are available for Amahi 11. Check the App Store before proceeding.


For assistance, visit the Amahi Forums or live support on the Amahi IRC channel.

Prerequisites

You need to obtain an install code (denoted YOUR-INSTALL-CODE below) from the Amahi control panel after configuring a profile for the system you are installing, with proper network configuration for your network.

Express CD is preconfigured as follows:

  • LOCALIZATION:
    • KEYBOARD: defaults to English (US).
    • LANGUAGE: defaults to English.
    • TIME AND DATE: defaults to server time zone.
  • SOFTWARE: Minimal Install and should not be changed.
  • INSTALLATION DESTINATION: defaults to the first hard drive in a multi-drive system.
  • NETWORK & HOST NAME: detected automatically.
  • USER SETTINGS: user admin is preconfigured with a password of administrator.

Download

  • Amahi 11 Express CD (based on Fedora 27 Server) for 64 bit (577MB)
  • Burn the ISO to CD/DVD (or USB), insert the media into your server, and boot the system.
  • The instructions below have screen shots and commentary. If you are not an advanced Linux user and know what you are doing, recommend you DO NOT deviate from the guidance. Click [<Screenshot>] to show/hide the image.

Boot Screen

  • Select Install Amahi 11

    A11E-SS0.PNG


Language Selection

  • Choose desired language and select Continue

    A11E-SS1.PNG


Installation Summary

  • The INSTALLATION SUMMARY screen will appear. It may take a few minutes to finish Downloading package metadata

    A11E-SS3.PNG


  • Choose AMAHI SERVER SETUP and enter YOUR-INSTALL-CODE obtained earlier followed by Done.

    A11E-SS6.PNG


  • Select KEYBOARD and choose the default layout followed by Done.

    A11E-SS4.PNG


    • If your keyboard layout is not listed, select the plus sign (+) and add the desired layout.

      A11E-SS5.PNG


    • Choose the desired layout followed by Done.
  • Verify:
    • TIME & DATE and change to match your locale if needed.
    • INSTALLATION DESTINATION indicates the correct hard drive if you have more than one connected.
    • NETWORK & HOST NAME indicates connected. Don't make any changes unless you are sure of what you are doing.

Begin Installation

  • Back to the INSTALLATION SUMMARY and ready to begin installation. Select Begin Installation

    A11E-SS7.PNG


Installation Progress

  • Now all of the configuration steps are complete. Sit back and watch the progress.

    A11E-SS8.PNG


  • Once installation is complete, the machine will automatically reboot. You will next see see a black screen with no graphics displaying the Amahi 11 installation progress. When it's finished, the machine will again reboot automatically.

    A11E-SS10.PNG


  • Once reboot is complete, you should have a fully functional home server using the IP address set up in your network!

    A11E-SS11.PNG



Next you need to transition your network to use it!

Transitioning to your Amahi server

Once installed, you will want to transition your network to using your Amahi server. Here are some of the things you should know:

  • Your server will boot with the static IP you pre-configured in the Amahi control panel
  • This is a headless server, therefore it will boot to a text console. There is no desktop user interface. Installing the Desktop (e.g. GNOME) interface will break DNS/DHCP and make the HDA as an unsuitable network server (details)
  • It's strongly recommended you follow the transition to Amahi HDA guide to get your network fully working properly
  • You can verify if the dashboard is available by accessing it from any client using the IP address of your server http://IPADDRESS/ or http://hda/ (in most Windows clients this works even without DNS from your HDA)
  • The first time you access the dashboard, you will need to login with user name and password as noted above in Prerequisites.

    A11-SS1.PNG


  • Once you reach your dashboard, recommend you configure your HDA settings, create/manage shares, add more storage space, install apps, etc.

    A11-SS2.PNG


  • Optionally refer to Greyhole to install/configure storage pooling.

Troubleshooting

Visit the troubleshooting page if you find yourself in trouble.

Reference

Refer to the HDA Admin How To page for Amahi Server administrator guidance.


Go back to Amahi Docs page.

Retrieved from "https://wiki.amahi.org/index.php?title=Amahi_11_Install&oldid=111496"