These The instructions below will guide you through the Amahi 11 Express CD installation, step by step, with screenshots. This is for the recommended install method for quick download and fast setupyou choose. Should the Amahi 11 Express CD not work for you, there are two alternate install methods: [[Fedora_27_Server_CD_Install|Minimal CD]], so-called Netinstall or [[Fedora_27_Server_DVD_Install|Full (DVD)]] (provides additional hardware support).<br>

You need to obtain an install code (denoted later referred to as YOUR-INSTALL-CODE below) from the [https://www.amahi.org/users Amahi control panel] after configuring a profile for the system you are installing, with '''proper network configuration''' for your network. Express CD is preconfigured for simple installation with minimal changes needed:* '''LOCALIZATION:'''** '''KEYBOARD:''' defaults to ''English (US)''.** '''LANGUAGE:''' defaults to ''English''.** '''TIME AND DATE:''' defaults to server time zone.* '''SOFTWARE:''' ''Minimal Install'' and should not be changed.* '''INSTALLATION DESTINATION:''' defaults to the first hard drive in a multi-drive system.* '''NETWORK & HOST NAME:''' detected automatically.* '''USER SETTINGS''': user ''admin'' is preconfigured with a password of ''administrator''. = Download =* Amahi 11 Express CD (based on Fedora 27 Server) for 64 bit (577MB)** Torrent - [http://dl.amahi.org/isos/Amahi-11-x86_64.torrent Amahi-11-x86_64.torrent] <code>(MD5 e32fb303d6488e98078042dc2d162d08)</code>** Direct Download - [http://dl.amahi.org/isos/Amahi-11-x86_64.iso Amahi-11-x86_64.iso] <code>(SHA1 cf972ec23f0c6b873884b80b4010b9b2b03be14a)</code> * Burn the ISO to CD/DVD (or [[USB Install|USB]]), insert the media into your server, and boot the system. * The instructions below have screen shots and commentary. If you are not an advanced Linux user and know what you are doing, recommend you '''DO NOT''' deviate from the guidance. Click '''[<Screenshot>]''' to show/hide the image. ==Boot Screen==<ul><li>Select ''Install Amahi 11''<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS0.PNG|600px]] </div><br></li></ul> ==Language Selection==<ul><li>Choose desired language and select ''Continue''<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS1.PNG|600px]] </div><br></li></ul> ==Installation Summary==<ul><li>The '''INSTALLATION SUMMARY''' screen will appear. It may take a few minutes to finish ''Downloading package metadata''<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS3.PNG|600px]] </div><br><li>Choose '''AMAHI SERVER SETUP''' and enter YOUR-INSTALL-CODE obtained earlier followed by '''Done'''.<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS6.PNG|600px]] </div><br></li><li>Select '''KEYBOARD''' and choose the default layout followed by '''Done'''.<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS4.PNG|600px]] </div><br></li><ul><li>If your keyboard layout is not listed, select the plus sign (+) and add the desired layout.<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS5.PNG|600px]] </div><br></li><li>Choose the desired layout followed by '''Done'''.</li></ul><li>Verify:</li><ul><li>'''TIME & DATE''' and change to match your locale if needed.</li><li>'''INSTALLATION DESTINATION''' indicates the correct hard drive if you have more than one connected.</li><li>'''NETWORK & HOST NAME''' indicates ''connected''. Don't make any changes unless you are sure of what you are doing.</li> </ul></ul> ==Begin Installation==<ul><li>Back to the '''INSTALLATION SUMMARY''' and ready to begin installation. Select ''Begin Installation''<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS7.PNG|600px]] </div><br></li></ul> ==Installation Progress==<ul><li>Now all of the configuration steps are complete. Sit back and watch the progress.<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:600px">[[file:A11E-SS8.PNG|600px]] </div><br></li><li>Once installation is complete, the machine will automatically reboot. You will next see see a black screen with no graphics displaying the Amahi 11 installation progress. When it's finished, the machine will again reboot automatically.<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS10.PNG|800px]] </div><br></li><li>Once reboot is complete, you should have a fully functional home server using the IP address set up in your network! <div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11E-SS11.PNG|200px]] </div><br><li>To access the terminal, login with user name and password as noted above in [[Amahi_11_Install#Prerequisites|Prerequisites]].</li></ul><br>Next you need to transition your network to use it! = Transitioning to your Amahi server =

Once installed, you will want to transition your network to using your Amahi server. Here are some of the things you should know:= Install Method =<ul><li>Your server will boot with the static IP you pre-configured in the Amahi control panel</li><li>This is a headless server, therefore it will boot to a text console. There is no desktop user interface. '''Installing the Desktop (e.g. GNOME) interface will break DNS/DHCP and make the HDA as an unsuitable network server''' [[Amahi_8_Troubleshooting#Virtualization_Stack_Breaks_DNS.2FDHCP_Server|(details)]]</li><li>It's strongly recommended you follow the [[transition to are three methods for installing Amahi]] HDA guide to get your network fully working properly</li><li>You can verify if the dashboard is available by accessing it from any client using 11 in the IP address of your server '''<nowiki>httporder preferred://IPADDRESS/</nowiki>''' or '''<nowiki>http://hda/</nowiki>''' (in most Windows clients this works even without DNS from your HDA)</li><li>The first time you access the dashboard, you will need to log in with user name and password as noted above in * [[Amahi_11_Install#PrerequisitesFedora_27_Server_CD_Install|PrerequisitesMinimal CD]](a.<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">[[file:A11-SS1k.PNG|250px]] </div><br></li><li>Once you reach your dashboard, recommend you configure your HDA [[Setup|settings]], [[Storage_and_file_sharing|create/manage shares]], [[Adding_a_second_hard_drive_to_your_HDA|add more storage space]], install apps, etca.Netinstall is best option)<div class="mw-collapsible mw-collapsed" data-collapsetext="{{int:Screenshot}}" style="width:400px">* [[file:A11-SS2.PNGFedora_27_Server_DVD_Install|400pxFull DVD]] </div><br></li>(provides additional hardware support when Netinstall fails)<li>Optionally refer to * [[Greyhole#Amahi_7.2F8Amahi_11_Express_DVD_Install|GreyholeExpress DVD]] to install/configure storage pooling.</li></ul>(quickest option, but not customizable and last resort)