Amahi Energy Saver

From Amahi Wiki
Revision as of 20:49, 13 February 2011 by Jayrock (talk | contribs)
Jump to: navigation, search

General

This project is approaching beta. It runs fine on my machine, however I need more feedback from the community to be sure that it's stable enough for the general public. So, please test and report your experience!


Introduction

Running servers when they are not needed can waste a considerable amount of energy. This project aims at sending Amahi server to suspend or poweroff when not needed.

To do so, Amahi Energy Saver regularly scans for connected clients, which are defined in the "monitored host list". If none of these clients is turned on, the system suspends after a configurable period.

So, for instance, you may want to add your client PC and your PS3 to the monitored host list. The Amahi Box will then stay up and running as long as client PC and/or PS3 are up and running. However, you might not want to add your home router to the list, as the router is always turned on.

With the calendar fucntion one can define scheduled wake ups and periods during which the server shall stay awake no matter what.

Amahi Energy Saver also checks shares. As long as shares are accessed, the server does not suspend. If set up to do so, Squeezeboxserver is monitored to prevent suspend while Squeezeboxes are turned on.

When the system is to be used again, simply wake it up with WOL (ref. http://en.wikipedia.org/wiki/Wake-on-LAN). There are many tools to generate WOL packets, and it is even possible to wake your server over the internet (good link: http://www.wakeonlan.me/).


Download

Download the latest tested and released version here: http://code.google.com/p/amahienergysaver/downloads/list

Latest untested sources are available at Git: https://github.com/jayrockk/Amahi-Energy-Saver

Initial setup

1. Copy the tar.gz file from the download page to some folder and unpack it with tar -zxf filename.

2. Open a terminal, change to that folder and get superuser rights by running su

3. As root, run ./aes-install.sh

4. Navigate to /usr/share/aes and run ./aes.rb --shownetworkhosts to show and select to add any currently active network host to the list of monitored hosts. Run ./aes.rb --showmonitoredhosts to check the monitored hosts and delete the ones you want to remove.

5. As root, run service aes start to start the service. Be careful, when you start the service the sytem MAY go to sleep when you don't expect it. Once it works as you want it, run chkconfig aes on to make the service start on boot.


Integration with Amahi calendar

1. Open a terminal on your hda.

2. Type su and provide your root password

3. Type cd /usr/share/aes

4. Type ./aes --calendar ical

4b. To be sure, restart the service by typing service aes restart

5. Only required for 0.3.6 and below: Open your HDA dashboard and go to "Settings" -> "Calendars".

6. Only required for 0.3.6 and below: Add a new calendar named aes

7. Connect your client to the new calendar. NOTE: Please read this article if you are unsure how to do this: Calendars

8. Use your favourite calendar client to populate the calendar with events.


Done! Your HDA will now wake up and stay powered on according to the events defined in the aes calendar.


Command Line Interface

  • Note: Currently root privileges are required to execute the CLI command. Navigate to /usr/share/aes to use the CLI correctly.

./aes.rb --shownetworkhosts
Lists the hosts found in the network, ie, all devices connected to the network. Gives the user the choice to add hosts to the monitored host list.

./aes.rb --showmonitoredhosts
Show a list of all hosts which are monitored by AES (i.e. the monitored host list), and also allows to delete hosts from the list. If these hosts are up and running (and respond to ping), the server does not suspend.

./aes.rb --addhost macadress
Manually add a host to the monitored host list. Observe the MAC address format, which has to be XX:XX:XX:XX:XX:XX. Example is
./aes.rb --addhost 12:34:56:78:90:ab

./aes.rb --calendar [off|internal|ical|debug]
./aes.rb --calendar shows the current setting. ./aes.rb --calendar off turns the calendar off, ./aes.rb --calendar calendar makes aes use its internal calendar function and ./aes.rb --calendar ical activates the Amahi calendar integration. To show diag information use ./aes.rb --calendar debug

./aes.rb --showcalendar
Lists the current entries of the internal. Calendar entries define times when the server does not suspend. Also, the server will be woken up at the beginning of a calendar entry.

./aes.rb --addcalendar startdate starttime stopdate stoptime
Use this command to add an entry to the internal calendar. Format of startdate/stopdate: YYYY-MM-DD Format of starttime/stoptime: hhm:mm. Eg.
./aes.rb --addcalendar 2010-12-20 15:00 2010-12-20 16:00
will keep the server awake on Dec 20th, 2010 from 15 to 16 hrs (3 to 4 pm). The server will also wake up at 15 hrs if it is suspended.

./aes.rb --shutdowntype
Show and modifiy the type of shutdown. NOTE: Not all shutdown types may be supported on your system, or may work correctly. Therefore, test that your machine is suspending and coming up correctly before deciding for a setting. Poweroff is safest type.

./aes.rb --sbs [on|off|debug]
./aes.rb --sbs shows the current setting. ./aes.rb --sbs on and ./aes.rb --sbs off switch monitoring of Squeezeboxserver on or off, respectively. The command ./aes.rb --sbs debug displays diagnostic information

./aes.rb --interval
aes checks regularly if the system can be suspended or shut down. This parameter specifies the time in seconds between two such checks. Normally should be left untouched.

./aes.rb --help
Displays command line help


Selecting ShutdownType

The different options for ShutdownType are explained here:

 Poweroff

This is a full shutdown and should work on most systems. Some mainboards do not allow scheduled wakeup when using this method.

 ACPI_S1

Legacy ACPI S1 state. Support depends on mainboard and Fedora support

 ACPI_S3

Legacy ACPI S3 state. Support depends on mainboard and Fedora support

 ACPI_S4

Legacy ACPI S4 state. Support depends on mainboard and Fedora support

 mem

Suspend to memory, is intended to replace ACPI S1 but is not widely supported yet

 disk

Suspend to disk, is intended to replace ACPI S4 but is not widely supported yet

 standby

Suspend to memory, is intended to replace ACPI S3 but is not widely supported yet

When selecting the shutdown type the following procedure is suggested:

  • Start with Poweroff to do basic checking and configuration. Since this is the safest version, it should also be your resort in case of problems.

  • Once things are working, select either of the ACPI_S1..3 depending on what level of suspend you want

  • If you are brave or the ACPI options don't work, try mem, disk or standby.

Windows client

On the download page there is a Windows client for automatic or manual wakeup of the HDA.

  • Installation

Just run the msi file found on the download page. The client will be included in the startup folder.

  • Configuration

1. Form the start menu, run AmahiEnergySaver -> AES Client

2. Right click on the icon that will appear in symbol bar, and select "Show config"

3. To get started, make sure that you set "Host MAC" and "Host name" to your HDA configuration. Hit "Select Server" to bring up the "Select HDA" window, and then "Search". If possible the correct server is alreday selected, in that case just hit "Ok" to confirm. Continue with 4.

If the server appears on the list but is not automatically selected, click on it and hit return.

Should your server not show up at all, press "Cancel" to exit the "Select HDA" dialog and configure MAC and host name manually.

Finally, if requried, change the "Port" setting. The default "9" should work in most cases.

4. Hit the "OK" butten, then right click on the symbol again, select "Exit" and and restart the program as described in 1.

5. Done! You should now be able to start your HDA by right clicking on the icon in the symbol bar and select "Wake now"


Logs

Logs are located in /usr/share/aes and named aes.log*