Changes

From Amahi Wiki
Jump to: navigation, search
no edit summary
This step is where you finally point the physical drive to the VM, through the Proxmox console.<br />
This command will add a IDE "abstracted" device to VM101:
{{Code|Code= <pre>qm set vm101 -ide0 /dev/sdb}}</pre>
<ul>
<li>vm101 is the ID of the virtual machine to which you want to point the drive.</li>
Once booting this KVM, now add this drive by manually, permanently mounting it to the VM. This could be via editing the /etc/fstab within the VM or using any other drive mounting tool/method you wish. You should reference the Amahi drive-adding wiki article at this point to ensure the drive is added appropriately: <br />[https://wiki.amahi.org/index.php/Adding_a_second_hard_drive_to_your_HDA Adding a Second Drive to your HDA] <br />
For each physical drive you add, you can decide to pool it to Greyhole or not. It helps to understand some commands for managing drives and volumes and partitions in Linux before doing too much moving around.</li></ol>
<h4>NOTE: Greyhole drives or drive images with data on them can be added to a newly installed Amahi VM and if mapped identically as before, they should function fine once the {{Code|Code= <pre>greyhole -f}} </pre>
command has run through a couple times. <br />
Do reference [https://wiki.amahi.org/index.php/Post-Install_Hardware_Changes Post Install Hardware Changes] for swapping hardware, which is similar to changing from a physical to virtual setup.</h4>
12,424

edits