Difference between revisions of "Express Disc troubleshooting"

From Amahi Wiki
Jump to: navigation, search
 
(30 intermediate revisions by 4 users not shown)
Line 1: Line 1:
Sometimes, the express cd installer gets caught in a rebootloop.
+
{{MessageBox|
It asks you to reboot, then it tells you it needs to reboot again over and over.
+
backgroundcolor = #faa|
If you are one of the lucky ones expiriencing this, here's what to do:
+
image =Warning.png|
 +
heading =WARNING|
 +
message = Amahi 7 for Fedora 19<br />Maintenance Support ONLY!}}
 +
= '''WARNING''' =
 +
 
 +
= Amahi 7 Express Disc =
 +
 
 +
==System crashes during Install==
 +
 
 +
Install crashes after the initial information gathering section, but before the files start to be copied from the DVD:
 +
* Check if the BIOS has any UEFI boot settings and if so, disable them or set the options to legacy only boot.
 +
*  Disable secure boot mode if available.
 +
 
 +
 
 +
This fixed a crash with a Gigabyte motherboard.
 +
 
 +
==tsc fast calibration failed==
 +
After selecting the first '''Install Amahi 7''' option, you received the error ''tsc fast calibration failed''. Shortly after this the screen may go blank, and although the DVD drive continued to spin for a few minutes, install may never progress.
 +
 
 +
To overcome the error, select the '''Troubleshooting''' option, and choosing the '''Install with basic graphics''' option.  Installation should now proceed.
 +
 
 +
== Second reboot does not occur ==
 +
 
 +
If the second reboot does not occur, this means the install is not finished. One reason for this to happen is a wrong setting in the Network page of your Installer. By default it says this and we recommend this is left as is:
 +
 
 +
  Hostname: localhost.localdomain
 +
 
 +
However, I had filled in my host names (which resolved).
 +
 
 +
The solution was to reinstall and leave the Network page of the installer the defaul localhost.localdomain
 +
 
 +
== HTTP server is not running ==
 +
After succesfull second reboot I noticed that the Amahi dashboard did not work. I noticed that there was not running the http server, via the command
 +
 
 +
  ps -ef | grep http
 +
 
 +
This command showed me that an error occurred during startup of the http service. It could not resolve the hostname I gave it:
 +
 
 +
  systemctl status httpd
 +
 
 +
These commands started the httpd server, showing me that it was started correctly:
 +
 
 +
systemctl restart httpd
 +
systemctl status httpd
 +
 
 +
After a reboot this error occurred again. Now changing the value in /etc/hostname to
 +
 
 +
  localhost
 +
 
 +
fixed this.  After a reboot the http service is now started as it should be.
 +
 
 +
We recommend you leave the values in the Amahi express install at the network section to its default value:
 +
 
 +
  localhost.localdomain
 +
 
 +
<!--= Amahi 6 Express =
  
= Toubleshooting =
+
==Reboot Loop==
 +
Sometimes, the express cd installer gets caught in a reboot loop.
  
* If there is no network, you can try this:
+
It asks you to reboot, then it tells you it needs to reboot again over and over.
** Select debug
+
If you are one of the lucky ones experiencing this, here's what to do:
** system-config-network (configure your network interface correctly ( I used static ) / also make sure your dns are configured exit the system-config-network)
 
** /etc/init.d/network restart
 
** check that eth0 has started, if not edit /etc/sysconfig/network-scripts/ifcfg-eth0; modify ONBOOT=no to ONBOOT=yes; then issue the "ifup eth0" command.
 
** ConfigAmahi (wait for a while untill it says reboot, then reboot)
 
  
thanks to realbuz for providing this fix on the forum
+
If there is no network, you can try this:
edit by moredruid: added eth onboot=yes
+
* Select debug
 +
* system-config-network (configure your network interface correctly ( I used static ) / also make sure your dns are configured exit the system-config-network)
 +
* /etc/init.d/network restart
 +
* check that eth0 has started, if not edit /etc/sysconfig/network-scripts/ifcfg-eth0; modify ONBOOT=no to ONBOOT=yes; then issue the "ifup eth0" command.
 +
* ConfigAmahi (wait for a while untill it says reboot, then reboot)-->
 +
==Yum Update fails==
 +
If you try to do yum update after install and have problems, try this [http://digitizor.com/2009/06/17/how-to-fix-the-cannot-retrieve-repository-metadata-repomd-xml-error-in-fedora-11/ solution].

Latest revision as of 00:55, 15 September 2015

Warning.png WARNING
Amahi 7 for Fedora 19
Maintenance Support ONLY!


WARNING

Amahi 7 Express Disc

System crashes during Install

Install crashes after the initial information gathering section, but before the files start to be copied from the DVD:

  • Check if the BIOS has any UEFI boot settings and if so, disable them or set the options to legacy only boot.
  • Disable secure boot mode if available.


This fixed a crash with a Gigabyte motherboard.

tsc fast calibration failed

After selecting the first Install Amahi 7 option, you received the error tsc fast calibration failed. Shortly after this the screen may go blank, and although the DVD drive continued to spin for a few minutes, install may never progress.

To overcome the error, select the Troubleshooting option, and choosing the Install with basic graphics option. Installation should now proceed.

Second reboot does not occur

If the second reboot does not occur, this means the install is not finished. One reason for this to happen is a wrong setting in the Network page of your Installer. By default it says this and we recommend this is left as is:

 Hostname: localhost.localdomain

However, I had filled in my host names (which resolved).

The solution was to reinstall and leave the Network page of the installer the defaul localhost.localdomain

HTTP server is not running

After succesfull second reboot I noticed that the Amahi dashboard did not work. I noticed that there was not running the http server, via the command

 ps -ef | grep http

This command showed me that an error occurred during startup of the http service. It could not resolve the hostname I gave it:

 systemctl status httpd

These commands started the httpd server, showing me that it was started correctly:

systemctl restart httpd
systemctl status httpd

After a reboot this error occurred again. Now changing the value in /etc/hostname to

  localhost

fixed this. After a reboot the http service is now started as it should be.

We recommend you leave the values in the Amahi express install at the network section to its default value:

 localhost.localdomain

Yum Update fails

If you try to do yum update after install and have problems, try this solution.