Trusted, Bureaucrats, Administrators
12,424
edits
Changes
From Amahi Wiki
Express Disc troubleshooting (view source)
Revision as of 00:55, 15 September 2015
, 00:55, 15 September 2015no edit summary
{{MessageBox|backgroundcolor = #faa|image =Warning.png|heading =WARNING|message = Amahi 7 Express Disc Toubleshooting for Fedora 19<br />Maintenance Support ONLY!}}= '''WARNING''' =
=Amahi 7 Express Disc = Second reboot is not occurring (install is not finished) ==One reason for this to happen is a wrong setting in the Network page of your Installer.<br>It says by default<br> Hostname: localhost.localdomain<br><br>I filled in ams.ldqk.net (substituted localhost by ams and localdomain by ldqk.net)<br><br>In my Control Panel - Home Domain I entered<br>ldqk.net<br>The installer will finish correctly (so it seems) but the second reboot will never happen.
If the second reboot does not occur, this means the install is not finished. One reason for this to happen is a wrong setting in the Network page of your Installer. By default it says this and we recommend this is left as is: Hostname: localhost.localdomain However, I had filled in my host names (which resolved). The solution was to reinstall and leave the Network page of the installer the defaul localhost.localdomain == HTTP server is not running ==After succesfull second reboot I noticed that the Amahi dashboard did not work. I noticed that there was not running the http server, via the command ps -ef | grep http This command showed me that an error occurred during startup of the http service. It could not resolve the hostname I gave it: systemctl status httpd These commands started the httpd server, showing me that it was started correctly: systemctl restart httpd systemctl status httpd After a reboot this error occurred again. Now changing the value in /etc/hostname to localhost fixed this. After a reboot the http service is now started as it should be. We recommend you leave the values in the Amahi express install at the network section to its default value: localhost.localdomain <!--= Amahi 6 Express =
==Reboot Loop==
* /etc/init.d/network restart
* check that eth0 has started, if not edit /etc/sysconfig/network-scripts/ifcfg-eth0; modify ONBOOT=no to ONBOOT=yes; then issue the "ifup eth0" command.
* ConfigAmahi (wait for a while untill it says reboot, then reboot)-->==Yum Updatefails==
If you try to do yum update after install and have problems, try this [http://digitizor.com/2009/06/17/how-to-fix-the-cannot-retrieve-repository-metadata-repomd-xml-error-in-fedora-11/ solution].
