Express Disc troubleshooting

From Amahi Wiki
Revision as of 05:04, 26 August 2010 by Cpg (talk | contribs)
Jump to: navigation, search

Toubleshooting

Sometimes, the express cd installer gets caught in a reboot loop.

It asks you to reboot, then it tells you it needs to reboot again over and over. If you are one of the lucky ones experiencing this, here's what to do:

  • If there is no network, you can try this:
    • Select debug
    • system-config-network (configure your network interface correctly ( I used static ) / also make sure your dns are configured exit the system-config-network)
    • /etc/init.d/network restart
    • check that eth0 has started, if not edit /etc/sysconfig/network-scripts/ifcfg-eth0; modify ONBOOT=no to ONBOOT=yes; then issue the "ifup eth0" command.
    • ConfigAmahi (wait for a while untill it says reboot, then reboot)

thanks to realbuz for providing this fix on the forum edit by moredruid: added eth onboot=yes

Retrieved from "https://wiki.amahi.org/index.php?title=Express_Disc_troubleshooting&oldid=17833"