<ul>

<li>Select ''Install Fedora-Server 21''

[[File:SS0-Boot.PNG|600px]]

</div><br></li>

<ul>

<li>Choose desired language and select ''Continue''

[[File:SS1-Language.PNG|600px]]

</div><br></li>

<ul>

<li>The '''INSTALLATION SUMMARY''' screen will appear. It may take a few minutes to finish ''Checking software dependencies''

[[File:SS2-Install.PNG|600px]]

</div><br></li>

<li>Once complete, next choose ''INSTALLATION DESTINATION''. This is where you will select the disk drive to use.

[[File:SS3-Install.PNG|600px]]

</div><br></li>

<ul>

<li>Choose the disk drive you want to use for the Fedora installation. If you have more than one disk drive connected, '''DO NOT''' select them at this time.

[[File:SS4-Install-Disk.PNG|600px]]

</div><br></li>

<li>You will notice a ''check mark'' on the disk drive selected. Select ''I will configure partitioning'' and then choose ''Done''.

[[File:SS5-Install-Disk.PNG|600px]]

</div><br></li>

<li>Ensure the ''New mount points will use the following partitioning scheme:'' is changed to reflect '''Standard partition'''. Refer to [[Fedora_21_Existing_Disk|remove existing disk partitions]] guidance if you are not using an empty disk drive. Then select ''Click here to create them automatically''.

[[File:SS6-Install-Disk.PNG|600px]]

</div><br></li>

<li>The disk drive partition should look similar to this setup. For most users, then default partitioning scheme used will suffice. However, you can manually change it using the [[Hard_Drive_Partition_Scheme|hard drive partition scheme]] documentation as a guide. Once complete, choose ''Done''

[[File:SS7-Install-Disk.PNG|600px]]

</div><br></li>

<li>You will now see '''SUMMARY OF CHANGES''' to the disk drive. Choose ''Accept Changes''

[[File:SS8-Install-Disk.PNG|600px]]

</div><br></li>

<ul>

<li>Back to the '''INSTALLATION SUMMARY''' and ready to begin installation. Select ''Begin Installation''

[[File:SS9-Install.PNG|600px]]

</div><br></li>

<ul>

<li>Installation has begun, but we need to create the First ''Admin'' User and password (This will be your HDA Login). Ensure you select ''Make this user administrator'' check box. Once complete, choose ''Done''. A weak password may require you to select ''Done'' twice. '''DO NOT''' set the root password.

[[File:SS12-User.PNG|600px]]

</div><br></li>

<ul>

<li>Now all of the configuration steps are complete. Sit back and watch the progress.

[[File:SS13-Install.PNG|600px]]

</div><br></li>

<ul>

<li>Installation is complete. Choose ''Reboot'' and remove the installation media.

[[File:SS14-Finished.PNG|600px]]

</div><br></li>