OpenVPN Config

From Amahi Wiki
Revision as of 19:37, 20 August 2009 by DTgreat (talk | contribs)
Jump to: navigation, search

If you want to write a custom configuration, or don't want to use the HDAconnect tool, this will help you set up OpenVPN on a Windows XP/Vista/7 machine, without much of a problem if you have the default settings for Amahi installed and your port forwarding set to 1194 UDP.


Step 1: Download OpenVPN GUI from [1]

(Click the stable link on the left, choose the installer.)


Step 2: Install OpenVPN

You can just click through, and install any drivers it asks you for.


Step 3: Writing a config file

Open a text editor of your choice, and copy the following:



client

dev tun

proto udp

remote YOURIPHERE 1194 #This needs to be changed per your external IP address

route 192.168.1.0 255.255.255.0 vpn_gateway 3 #Use your network IP address, usually a router is at default 192.168.1.1

resolv-retry infinite

nobind

persist-key

persist-tun

ca ca.crt

cert homehda.crt

key homehda.key

comp-lzo

verb 3

auth-user-pass

route-method exe

route-delay 2



You only need to change the bolded text.


Step 4: Save the config file to the directory you installed OpenVPN to

There is a folder labeled configs make sure you have the extension saved as *.opvn using the "all files" option.


Step 5: Launch

Launch OpenVPN GUI, and you should be ready to go. Right click on the Icon, select the config file you wrote, connect, log in, and enjoy.