* Make sure you have the proper network settings set up in your [http://www.amahi.org/user control panel], with one profile and one install code

* Get the installer by executing the following command in the terminal window (hint: use copy and paste):

* The install script partially runs as root so it will ask for your password

* This should take a little while and many messages will flash by the screen. The time depends on the speed of your PC and your internet connection.

After rebooting, '''<nowiki>http://hda</nowiki>''' should be working if entered on the local system. From a remote system this will only work if you have your DNS pointing to the amahi system as otherwise your system cannot resolve the name "hda".

= Troubleshooting =

Double check your network settings with '''<code>ifconfig</code>''' and '''<code>route -n</code>'''. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command

assuming 192.168.1.14 is your IP address. The route can be changed with

assuming 192.168.1.1 is the address of your router.<br>