Ubuntu

From Amahi Wiki
Revision as of 12:49, 12 May 2012 by EFfeM (talk | contribs) (Undo revision 54644 by EFfeM (talk))
Jump to: navigation, search
Warning.png WARNING
This is only for developers and advanced users. Do NOT use with data you would not mind losing!



Beta 1 Release

Welcome to the Beta 1 release of Amahi Ubuntu Edition!

This is our first beta release ... still expect turbulence! Let's start with the caveats and then on to how to install!

Caveats

  • This is a fist beta release. Expect things to mostly work, but your machine could still explode in a million pieces, losing all the data.
  • Only 32bit is supported. The 64bit and ARM editions are not supported yet
  • No graphical installer yet. Installation involves two CLI (command-line) commands
  • Note that this is intended to be installed under Ubuntu 12.04 desktop. Ubuntu server probably should not cause problems, but it's not tested. We suspect things like Kubuntu/Lubuntu/Gobuntu/Edubuntu/.... may also work but this is not tested. No warranty. Feel free to report results, however.
  • No applications are available for Ubuntu yet. This is on purpose, so that we keep the focus tightly on platform stability before chasing ghosts in apps
  • Only supported on Ubuntu 12.04
  • Greyhole is not yet supported
  • Debian is not well supported in this release (there are a couple of known issues). We are focusing on Ubuntu only for now.

How to install Amahi on Ubuntu i386

  • Download the Ubuntu 12.04 CD/DVD from the Ubuntu downloads page
  • Install Ubuntu
  • Start a terminal. On the Dash home, search for terminal. Click on the icon with caption terminal
  • Make sure you have the proper network settings set up in your control panel, with one profile and one install code
  • Get the installer by executing the following command in the terminal window (hint: use copy and paste):
bash code
​ wget http://ubuntu.amahi.org/install.12.04 ​
  • Then start the install with
bash code
​ sh install.12.04 ​
  • The install script partially runs as root so it will ask for your password
  • This should take a little while and many messages will flash by the screen. The time depends on the speed of your PC and your internet connection.
  • Firefox should start and prompt you for the install code for this HDA. Get your install code in a profile at the Amahi web site
  • If Firefox does not come up, start your browser and visit http://localhost:2000
  • Once the installation is completed the system will tell you to reboot.

Note that rebooting will change the IP address of your system to the addres you've given when creating your install code.

After rebooting, http://hda should be working if entered on the local system. From a remote system this will only work if you have your DNS pointing to the amahi system as otherwise your system cannot resolve the name "hda".

Troubleshooting

Double check your network settings with ifconfig and route -n. These should be the settings that you use in the installation. If these are not correct you can change the ip address by issuing the command

bash code
​sudo ifconfig eth0 192.168.1.14 netmask 255.255.255.0 up​

assuming 192.168.1.14 is your IP address. The route can be changed with

bash code
​sudo route add default gw 192.168.1.1​

assuming 192.168.1.1 is the address of your router.

This is especially important if you are doing a headless install

Other

Refer to the Debian page for the latest info, how to install via other methods and development updates.

The old Ubuntu information (mostly out of date now) is in the Ubuntu old page.

Problems, questions, etc.

If you encounter any problems, have questions or whatever, please stop by on our irc channel #amahi and #amahi-debian), or send them to the mailing list.

If you encountered a problem and found a solution feel free to add your solution to this page.

Related